8 / 55
Under cut anchors with internal thread | M12

Under cut anchors

Under cut anchor GBH with internal thread M12, galvanised

Display variants as list
Reset selection
Art.no.: 111268
Design: with internal thread
Connecting thread: M12
Sales unit: 25 Pieces
Weight/item: 0.078 kg
Pieces

Field of application

  • For anchorages in lightweight concrete panels and walls in dry interiors of buildings

Advantages

  • Anchoring without splaying pressure, immediately loadable
  • High load-bearing capacity due to pronounced undercut
  • Simple setting by driving in the tapered bolt and the splaying sleeve without pilot drilling
  • Approved by the building authorities
Basic data text
Under cut anchor GBH with internal thread M12, galvanised
Field of application
gas concrete (ETA)
Type
GBH I M12
Design
with internal thread
Product type
metal plugs
Thread length internal thread screw-in depth
12 - 18 mm
Material
Steel
Surface
galvanised
Connecting thread
M12
eCl@ss 11.1
23-15-21-03
eCl@ss 7.1
23-15-21-03
Fire protection certified
Yes
VdS
Yes
Approved by the building authorities
Yes
Permissible loads cracked gas concrete GB3.3 tension zone
0.8 kN
Permissible loads cracked gas concrete GB4.4 pressure zone
1.2 kN
Admissible load uncracked gas concrete G2 compression zone
0.6 kN
Admissible load uncracked gas concrete G4 compression zone
1.2 kN
Admissible load uncracked gas concrete GB3.3 compression zone
0.8 kN
Permissible loads uncracked gas concrete GB4.4 pressure zone
1.2 kN
Min. building element thickness
17.5 cm
Customs tariff number
73181900
Further technical details can be found in the data sheet.