9 / 55
Screws for concrete MMS-plus With hexagonal head and pressed washer type SS | 120

Screws for concrete MMS-plus

Hexagon screw for concrete MMS-plus, 10 x 120 mm, clamping range 55 mm or 70 mm, galvanised

Display variants as list
Reset selection
Art.no.: 166639
Type: With hexagonal head and pressed washer type SS
Length L [mm]: 120
Sales unit: 25 Pieces
Weight/item: 0.055 kg
Pieces

Field of application

  • For anchorages free of expansion pressure in cracked and non-cracked concrete
  • Direct mounting of attachment parts, such as brackets, support channels, base plates, etc.
  • Also applicable in lime sand brick, solid brick, clinker and natural stone
  • For anchorages in prestressed concrete hollow core slab ceilings

Advantages

  • More than 25 % reduction of assembly time per attachment point
  • Versatile use in concrete and other solid building materials
  • High security, no splaying effect - thus can be placed close to the edge and to other screws
  • High load capacity due to form lock
  • Easy to withdraw, facilitates corrections during installation
  • No additional mounting or setting tools required
  • European Technical Assessment for cracked and uncracked concrete
  • Fire protection in concrete
  • Suitable for the installation of gas mains according to the TRGI (Technical Rules for Gas Installations)
  • Two effective anchorage depths for greater flexibility
  • European Technical Assessment for anchorages in prestressed concrete hollow core slab ceilings
  • European Technical Assessment for anchorages in masonry
Basic data text
Hexagon screw for concrete MMS-plus, 10 x 120 mm, clamping range 55 mm or 70 mm, galvanised
Field of application
Solid brick | Natural stone, hard | Lime sand brick | concrete non-cracked (ETA) | concrete cracked (ETA)
Type
With hexagonal head and pressed washer type SS
Product type
metal plugs
Thread diameter
10 mm
Material
Steel
Surface
galvanised
Length L [mm]
120
Admissible tensile load cracked concrete standard anchorage depth
4.4 kN
Anchoring depth standard anchorage depth
65 mm
Drilling depth reduced anchorage depth
60 mm
eCl@ss 7.1
23-15-21-05
Admissible tensile load uncracked concrete reduced anchorage depth
5.9 kN
Admissible tensile load cracked concrete reduced anchorage depth
3 kN
Drilling diameter
8 mm
eCl@ss 11.1
23-15-21-05
Head diameter dk
19 mm
Fire protection certified
Yes
ETA approval
Yes
Sprinkler
Yes
Drilling depth standard anchorage depth
75 mm
Admissible tensile load uncracked concrete standard anchorage depth
7.9 kN
Spanner width
13
Clamping thickness standard anchorage depth
55 mm
Customs tariff number
73181499
Further technical details can be found in the data sheet.