10 / 17
Screws for concrete MMS-plus With hexagonal head and pressed washer type SS | 50

Screws for concrete MMS-plus

Hexagon screw for concrete MMS-plus, 7.5 x 50 mm, clamping range 15 mm, galvanised

Display variants as list
Reset selection
Art.no.: 166633
Type: With hexagonal head and pressed washer type SS
Length L [mm]: 50
Sales unit: 50 Pieces
Weight/item: 0.015 kg
Pieces

Field of application

  • For anchorages free of expansion pressure in cracked and non-cracked concrete
  • Direct mounting of attachment parts, such as brackets, support channels, base plates, etc.
  • Also applicable in lime sand brick, solid brick, clinker and natural stone
  • For anchorages in prestressed concrete hollow core slab ceilings

Advantages

  • More than 25 % reduction of assembly time per attachment point
  • Versatile use in concrete and other solid building materials
  • High security, no splaying effect - thus can be placed close to the edge and to other screws
  • High load capacity due to form lock
  • Easy to withdraw, facilitates corrections during installation
  • No additional mounting or setting tools required
  • European Technical Assessment for cracked and uncracked concrete
  • Fire protection in concrete
  • Suitable for the installation of gas mains according to the TRGI (Technical Rules for Gas Installations)
  • Two effective anchorage depths for greater flexibility
  • European Technical Assessment for anchorages in prestressed concrete hollow core slab ceilings
  • European Technical Assessment for anchorages in masonry
Basic data text
Hexagon screw for concrete MMS-plus, 7.5 x 50 mm, clamping range 15 mm, galvanised
Field of application
concrete non-cracked (ETA) | concrete cracked (ETA) | Solid brick | Lime sand brick | Natural stone, hard
Type
With hexagonal head and pressed washer type SS
Product type
metal plugs
Thread diameter
7.5 mm
Material
Steel
Surface
galvanised
Length L [mm]
50
Admissible tensile load cracked concrete standard anchorage depth
1 kN
eCl@ss 11.1
23-15-21-05
Anchoring depth standard anchorage depth
35 mm
Drilling diameter
6 mm
eCl@ss 7.1
23-15-21-05
Head diameter dk
14 mm
Fire protection certified
Yes
ETA approval
Yes
Sprinkler
Yes
Drilling depth standard anchorage depth
40 mm
Admissible tensile load uncracked concrete standard anchorage depth
2 kN
Spanner width
10
Clamping thickness standard anchorage depth
15 mm
Customs tariff number
73181499
Further technical details can be found in the data sheet.