10 / 17
Screws for concrete MMS-plus With hexagonal head and pressed washer type SS | 40

Screws for concrete MMS-plus

Hexagon screw for concrete MMS-plus, 7.5 x 40 mm, clamping range 5 mm, galvanised

Display variants as list
Reset selection
Art.no.: 166632
Type: With hexagonal head and pressed washer type SS
Length L [mm]: 40
Sales unit: 100 Pieces
Weight/item: 0.013 kg
Pieces

Field of application

  • For anchorages free of expansion pressure in cracked and non-cracked concrete
  • Direct mounting of attachment parts, such as brackets, support channels, base plates, etc.
  • Also applicable in lime sand brick, solid brick, clinker and natural stone
  • For anchorages in prestressed concrete hollow core slab ceilings

Advantages

  • More than 25 % reduction of assembly time per attachment point
  • Versatile use in concrete and other solid building materials
  • High security, no splaying effect - thus can be placed close to the edge and to other screws
  • High load capacity due to form lock
  • Easy to withdraw, facilitates corrections during installation
  • No additional mounting or setting tools required
  • European Technical Assessment for cracked and uncracked concrete
  • Fire protection in concrete
  • Suitable for the installation of gas mains according to the TRGI (Technical Rules for Gas Installations)
  • Two effective anchorage depths for greater flexibility
  • European Technical Assessment for anchorages in prestressed concrete hollow core slab ceilings
  • European Technical Assessment for anchorages in masonry
Basic data text
Hexagon screw for concrete MMS-plus, 7.5 x 40 mm, clamping range 5 mm, galvanised
Field of application
Lime sand brick | Natural stone, hard | concrete cracked (ETA) | concrete non-cracked (ETA) | Solid brick
Type
With hexagonal head and pressed washer type SS
Product type
metal plugs
Thread diameter
7.5 mm
Material
Steel
Surface
galvanised
Length L [mm]
40
eCl@ss 7.1
23-15-21-05
eCl@ss 11.1
23-15-21-05
Admissible tensile load cracked concrete standard anchorage depth
1 kN
Drilling diameter
6 mm
Anchoring depth standard anchorage depth
35 mm
Head diameter dk
14 mm
Fire protection certified
Yes
ETA approval
Yes
Sprinkler
Yes
Drilling depth standard anchorage depth
40 mm
Admissible tensile load uncracked concrete standard anchorage depth
2 kN
Spanner width
10
Clamping thickness standard anchorage depth
5 mm
Customs tariff number
73181499
Further technical details can be found in the data sheet.