Field of application

  • For filling of cable bushings, hollow spaces in walls, floors or ceilings, for assembling of joinery as well as for sealing of jonits / fugues

Advantages

  • Environmentally friendly, single-component foam, moisture-curing, CFC-free
  • Good adhesion and adhesive strength to all building materials
  • Easy to work and quickly hardening
  • Low water absorption due to largely closed-cell foam
  • Very good thermal insulation
  • Fire classification B2 acc. to DIN 4102
  • When used with a cartridge gun, the PU-Foam can still be used without any problem after the cartridge has been opened (use PU-Cleaner to clean the nozzle)
Fire classification:
B2 acc. to DIN 4102 (normally flammable)
Expanded volume:
approx. 42 litres
Cleaning:
remove fresh foam with PU-Cleaner
Temperature range:
permanent: -40 °C to +100 °C, short-term: -40 °C to +130 °C
Application:
not sticky after 10 min, can be cut after 40 min
Working temperature:
+5 °C to +35 °C
Thermal conductivity:
λ < 0.040 W/mK
Water absorption:
0.03 Vol.%